Skip to content
Solution: TSS and CCTV monitoring with automatic intervention, for construction sites under Earth Control Measures.See how it works
Lovibond · Portable dissolved oxygen meter

SD 315 Oxi

The Lovibond SD 315 Oxi is a waterproof hand-held dissolved oxygen meter for measuring oxygen concentration, oxygen saturation and temperature in industry, laboratories and facilities such as sewage treatment or water works. Its Clark oxygen sensor allows immediate measurement. A data logger stores readings for processing with the logger software.

Oxygen concentration measuring range0 - 70 mg/L O2
Oxygen saturation measuring range0 - 600 %
Temperature measuring range0 - 50 °C
IP ratingIP 67
SD 315 Oxi handheld meter front view with display, keypad and probe cable attached

Highlights

01
Clark sensor, no polarization time

The Clark oxygen sensor allows immediate measurement without polarization time.

02
Oxygen, saturation and temperature

Measures dissolved oxygen from 0 - 70 mg/L, oxygen saturation from 0 - 600 % and temperature from 0 - 50 °C.

03
Manual and automatic data logger

The manual logger holds 1000 data sets. The automatic logger holds 10000 cyclic data sets at intervals of 1 - 3600 s.

04
IP 67 armoured hand-held housing

Protective armour gives a secure grip and fall protection. The rear stand also works as a hanger or belt clip.

Parameters

O2

Oxygen concentration

Range0 - 70 mg/L O2
O2 %

Oxygen saturation

Range0 - 600 %
T

Temperature

Range0 - 50 °C

Configurations

Every set includes the armoured instrument with electrode holder, batteries, KOH electrolyte, calibration bottle and two spare membrane heads, and only the sensor cable length differs.

724680

SD 315 Oxi Set 1

Includes oxygen sensor with 2 m cable.

724690

SD 315 Oxi Set 2

Includes oxygen sensor with 10 m cable.

724695

SD 315 Oxi Set 3

Includes oxygen sensor with 30 m cable.

Consumables

These are the consumables this instrument uses. We confirm the part numbers for your instrument when we quote.

Standards & buffers

Buffers & electrolytes

Calibration standards, pH buffers and electrolyte solutions for calibrating the instrument.

Electrodes & spares

Replacement sensors

Electrodes, probes and replacement sensors, matched to the instrument.

Specifications

DisplayBacklit LCD
Data loggerManual Logger: 1000 data sets (single value by keystroke). Auto. Logger: 10000 data sets (cyclic, time interval: 1 - 3600 s)
Auto-OFFYes
Power supply2 AAA batteries; Micro-USB
PortabilityPortable
Temperature compensationAutomatic
IP ratingIP 67
ComplianceCE
Dimensions98 x 37 x 164 mm
Weight287 g
Delivery scopeEvery set: Instrument in protective armouring including electrode holder; Batteries; Electrolyte solution (KOH) 100 ml; Calibration bottle with sponge; 2 pcs. spare membrane heads; Instruction manual; Warranty information. By set: oxygen sensor with 2 m cable (Set 1); oxygen sensor with 10 m cable (Set 2); oxygen sensor with 30 m cable (Set 3).

Tags and applications

Downloads

Common questions

Does the Lovibond SD 315 Oxi need polarization time before measuring?

No. The Clark oxygen sensor allows immediate measurement without polarization time.

What power supply does the SD 315 use?

It runs on 2 AAA batteries or by Micro-USB. Batteries are included in every set.

How many readings can the SD 315 store?

The manual logger stores 1000 data sets, one value per keystroke. The automatic logger stores 10000 data sets at a time interval of 1 - 3600 s.

Is the SD 315 waterproof?

Yes. The meter has an IP 67 rating and is supplied in protective armouring.

What sensor cable lengths are available for the SD 315?

The oxygen sensor is supplied with a 2 m cable in Set 1, a 10 m cable in Set 2 and a 30 m cable in Set 3.

Does the SD 315 have an alarm?

Yes. An integrated alarm sounds when the measured value deviates from predefined values.

Tell us what you need to measure.

Send the parameters and ranges you need, and we will confirm the right configuration and price. Your enquiry will name this product.