Skip to content
Solution: TSS and CCTV monitoring with automatic intervention, for construction sites under Earth Control Measures.See how it works
Lovibond · Portable multi-parameter meter

SensoDirect 150

The Lovibond SensoDirect 150 is a portable multiparameter water quality meter for checks in places such as cooling towers and boiler water, drinking water treatment, swimming pools and wastewater. It measures pH and temperature on every set, and each set adds conductivity and TDS, dissolved oxygen, or redox, so you choose the set that matches the parameters you check. The meter runs on AA batteries or a 9 V adapter and has a large LCD with contrast adjustment.

Conductivity0 µS/cm – 200 mS/cm, 4 ranges
Dissolved oxygen0 - 20 mg/L O2
pH0 - 14
TDS0 – 132000 ppm, 4 ranges
Temperature0 - 60 °C
IP ratingIP 51
Lovibond SensoDirect 150 meter standing upright with three probes laid in front of it

Highlights

01
One meter, four probe sets

A single portable meter covers pH and temperature on every set, with conductivity, TDS, dissolved oxygen or redox added depending on the set.

02
pH and temperature on every set

Every set measures pH over 0 - 14 and temperature over 0 - 60 °C.

03
Battery or adapter power supply

It runs on a DC 1.5 V (UM3, AA) battery or a DC 9 V adapter, and has an auto-off function.

04
Portable body rated IP 51

The unit measures 120 x 40 x 220 mm and weighs 625 g with batteries. It has a large LCD with contrast adjustment.

Parameters

Con

Conductivity

Range0 - 200 µS/cm
Range 10 - 200 µS/cm
Range 20.2 - 2.000 mS/cm
Range 32 - 20 mS/cm
Range 420 - 200 mS/cm
O2

Dissolved oxygen

Range0 - 20 mg/L O2
pH

pH

Range0 - 14
TDS

Total dissolved solids

Range 10 - 132 ppm
Range 2132 - 1320 ppm
Range 31320 - 13200 ppm
Range 413200 - 132000 ppm
Temp

Temperature

Range0 - 60 °C
Redox

Redox

Range-1999.9 - 1999.9 mV

Configurations

Every set uses the same meter and measures pH and temperature, and includes batteries, pH electrode, temperature probe, pH buffer set 4.01/7.00, manual and case.

724200

Set 1 pH Con TDS Oxi Temp.

Measures pH, conductivity, TDS, dissolved oxygen and temperature. Includes conductivity probe, oxygen sensor, electrolyte and membrane heads.

724210

Set 2 pH Con TDS Temp.

Measures pH, conductivity, TDS and temperature, with no oxygen measurement. Includes conductivity probe but no oxygen sensor.

724220

Set 3 pH Oxi Temp.

Measures pH, dissolved oxygen and temperature, with no conductivity or TDS. Includes oxygen sensor, electrolyte and membrane heads.

724230

Set 4 pH Redox Temp.

Measures pH, redox and temperature, with a redox range of -1999.9 - 1999.9 mV. Includes redox electrode.

Consumables

These are the consumables this instrument uses. We confirm the part numbers for your instrument when we quote.

Standards & buffers

Buffers & electrolytes, Calibration standards

Calibration standards, pH buffers and electrolyte solutions for calibrating the instrument.

Electrodes & spares

Electrodes & probes, Replacement sensors

Electrodes, probes and replacement sensors, matched to the instrument.

Specifications

Conductivity range0 - 200 µS/cm
Conductivity range0.2 - 2.000 mS/cm
Conductivity range2 - 20 mS/cm
Conductivity range20 - 200 mS/cm
Oxygen range0 - 20 mg/L O2
pH range0 - 14
TDS range0 - 132 ppm
TDS range132 - 1320 ppm
TDS range1320 - 13200 ppm
TDS range13200 - 132000 ppm
Temperature range0 - 60 °C
Redox range-1999.9 - 1999.9 mV
DisplayLarge LCD display with contrast adjustment
Auto-OFFYes
Power supplyDC 1.5 V battery (UM3,AA); DC 9 V adapter
PortabilityPortable
IP ratingIP 51
ComplianceCE
Dimensions120 x 40 x 220 mm
Weight625 g (unit incl. batteries)
Delivery scopeEvery set: instrument; batteries; pH electrode; temperature probe; pH buffer set 4.01/7.00; instruction manual; warranty information; in case. By set: conductivity probe (Set 1, Set 2); oxygen sensor, electrolyte and membrane heads (Set 1, Set 3); redox electrode (Set 4).

Tags and applications

Downloads

Common questions

What does the Lovibond SensoDirect 150 measure?

It measures pH and temperature on every set. Depending on the set it also measures conductivity, TDS, dissolved oxygen or redox.

What conductivity and TDS ranges does it cover?

Conductivity has four ranges: 0 - 200 µS/cm, 0.2 - 2.000 mS/cm, 2 - 20 mS/cm and 20 - 200 mS/cm. TDS has four ranges: 0 - 132 ppm, 132 - 1320 ppm, 1320 - 13200 ppm and 13200 - 132000 ppm.

What is the dissolved oxygen range?

The dissolved oxygen range is 0 - 20 mg/L O2.

Can the SensoDirect 150 measure redox?

Yes. Set 4 (pH, redox, temperature) measures redox from -1999.9 to 1999.9 mV and includes a redox electrode.

How is the SensoDirect 150 powered?

It runs on a DC 1.5 V (UM3, AA) battery or a DC 9 V adapter. It has an auto-off function.

What is supplied with every set?

Every set includes the instrument, batteries, pH electrode, temperature probe, pH buffer set 4.01/7.00, instruction manual, warranty information and a carrying case.

Tell us what you need to measure.

Send the parameters and ranges you need, and we will confirm the right configuration and price. Your enquiry will name this product.