Skip to content
Solution: TSS and CCTV monitoring with automatic intervention, for construction sites under Earth Control Measures.See how it works
Lovibond · Portable optical dissolved oxygen meter

SD 400 Oxi L

The Lovibond SD 400 Oxi L is a portable optical dissolved oxygen meter for work such as dilution BOD determination and wastewater testing. It measures oxygen by luminescence over 0 - 50 mg/L and compensates automatically for temperature, pressure and salt. Its data logger software monitors and stores readings, and a micro SD card holds the data.

Oxygen concentration measuring range0 - 50 mg/L
Oxygen saturation measuring range0 - 500 %
Temperature measuring range-5 - 50 °C
Pressure measuring range51 - 112 kPa
IP ratingIP 67 (sensor)
SD 400 Oxi L handheld meter with oxygen probe and stainless steel probe guard

Highlights

01
Optical luminescence dissolved oxygen measurement

Measures dissolved oxygen by luminescence, with no electrolyte to refill and no sample flow needed.

02
Temperature, pressure and salt compensation

Compensation is automatic, and the meter also reads temperature and pressure alongside oxygen concentration and saturation.

03
Data logging with micro SD

Logger software monitors, stores and transfers measurement data. A micro SD card holds data and a micro-USB port is fitted.

04
Optimised for standard BOD bottles

The electrode suits standard NS 19/26 BOD bottles and is intended for dilution BOD determination.

Parameters

O₂

Dissolved oxygen concentration

Range0 - 50 mg/L
Accuracy± 1 … ± 10 %
Sat

Oxygen saturation

Range0 - 500 %
Accuracy± 1 … ± 10 %
T

Temperature

Range-5 - 50 °C
Accuracy± 0.2 °C
p

Pressure

Range51 - 112 kPa

Configurations

Every configuration is the same SD 400 Oxi L meter for optical DO measurement, and they differ in whether a probe is supplied and in its cable length.

740030

SD 400 Oxi L

For optical DO measurement. Meter only, with instruction manual and warranty information.

740000

SD 400 Oxi L Set 1

For optical DO measurement. Probe with 1.5 m cable, case, metal guard, lanyard, and storage and calibration bottle.

740010

SD 400 Oxi L Set 2

For optical DO measurement. Probe with 3 m cable, case, metal guard, lanyard, and storage and calibration bottle.

740020

SD 400 Oxi L Set 3

For optical DO measurement. Probe with 10 m cable, case, metal guard, lanyard, and storage and calibration bottle.

Consumables

These are the consumables this instrument uses. We confirm the part numbers for your instrument when we quote.

Electrodes & spares

Electrodes & probes, Replacement sensors

Electrodes, probes and replacement sensors, matched to the instrument.

Specifications

Measuring principleOptical (luminescence)
Oxygen concentration measuring range0 - 50 mg/L
Oxygen saturation measuring range0 - 500 %
Temperature measuring range-5 - 50 °C
Pressure measuring range51 - 112 kPa
Oxygen concentration accuracyBelow 20 mg/L: ± 1 % of reading or 0.1 mg/L Above 20 mg/L: ± 10 % of reading
Oxygen saturation accuracyBelow 200 %: ± 1 % of reading or 0.1 % Above 200 %: ± 10 % of reading
Temperature accuracy± 0.2 °C
DisplayLarge backlit LCD
InterfacesMicro-USB
Data loggerSoftware for monitoring and storing data
Auto-OFFYes
External storageMicro SD card
Power supply4 AA batteries; Micro-USB
PortabilityPortable
Environmental conditions-5 - 50 °C
IP ratingIP 67 (sensor)
ComplianceCE
Dimensions98 x 54 x 162 mm
Weight330 g, with batteries
BOD bottle compatibilityStandard BOD bottles (NS 19/26)
Delivery scopeSD 400 Oxi Linstrument; instruction manual; warranty informationSD 400 Oxi L Set 1as Set 2, with an optical DO probe with 1.5 m cableSD 400 Oxi L Set 2instrument; optical DO probe with 3 m cable; 4 AA batteries; storage and calibration bottle; micro SD card with calibration data and data acquisition software; full user manual, printed and on the micro SD card; metal guard; micro-USB cable; lanyard; caseSD 400 Oxi L Set 3as Set 2, with an optical DO probe with 10 m cable

Tags and applications

Downloads

Common questions

Does the SD 400 Oxi L need electrolyte or a warm-up time?

No. It uses optical luminescence sensing, so there is no electrolyte to refill. It is ready for immediate use without warm-up or polarisation times.

Can it be used for BOD measurements?

Yes. The electrode is optimised for standard BOD bottles (NS 19/26) and is suited to dilution BOD determination.

How is the SD 400 Oxi L powered?

It runs from micro-USB or from four AA batteries. The unit weighs 330 g including batteries.

What ranges does it measure?

Oxygen concentration is 0 - 50 mg/L and saturation is 0 - 500 %. Temperature is -5 - 50 °C and pressure is 51 - 112 kPa.

Can it log and store measurement data?

Yes. Integrated data logger software monitors, stores and transfers data. A micro SD card provides external storage and the interface is micro-USB.

Which probe cable lengths are supplied?

SD 400 Oxi L Set 1 has a 1.5 m cable, Set 2 has 3 m and Set 3 has 10 m. The SD 400 Oxi L on its own is supplied without a probe.

Tell us what you need to measure.

Send the parameters and ranges you need, and we will confirm the right configuration and price. Your enquiry will name this product.