Skip to content
Solution: TSS and CCTV monitoring with automatic intervention, for construction sites under Earth Control Measures.See how it works
Ebro · Data logger

EBI 12-TP290

The Ebro EBI 12-TP290 is a precision pressure and temperature data logger for VH2O2 (vaporised hydrogen peroxide) sterilisers, for routine checks and validation of the fine vacuum the process depends on. It measures absolute pressure from 0.1 to 1,050 mbar, to ± 0.25 mbar up to 50 mbar, and temperature from 0 °C to +85 °C. It must never be used in a steam steriliser or above 2,000 mbar absolute.

Temperature range0 °C … +85 °C
Pressure range0.1 … 1,050 mbar (0.1 … 788 Torr)
Temperature accuracy± 0.1 °C
Pressure accuracyfrom ± 0.25 mbar
IP ratingIP68
stainless steel ebro data logger with a thin probe pin, seen from the side

Highlights

01
Temperature and pressure, one logger

Records temperature with a PT1000 class A sensor and pressure with a piezoresistive pressure sensor.

02
Selectable measurement modes

Endless measurement, measure upon start time, start immediately until end of memory, and start/stop measurement.

03
IP68 stainless steel housing

The housing is 316 L stainless steel and PEEK, rated IP68, with a user-replaceable 3.6 V lithium battery.

04
Real-time transmission and onboard memory

Supports real-time data transmission and holds 2x 33,440 measurements in memory, at intervals from 250 ms to 24 hours.

Parameters

T

Temperature

Range0 °C … +85 °C
Accuracy± 0.1 °C
Resolution0.01 °C
SensorPT1000, class A
p

Pressure

Range0.1 … 1,050 mbar (0.1 … 788 Torr)
Accuracyfrom ± 0.25 mbar
Resolution0.1 mbar
SensorPiezoresistive pressure sensor

Accuracy across the range

Accuracy over each temperature range. The bar shows where the range sits on the scale.

+0.1 … +50 mbarMost accurate± 0.25 mbar
+50 … +100 mbar± 5% from the measurement
+100 … +1050 mbar± 1% FS
+0.1 mbar+262.58+525.05+787.53+1050 mbar

Specifications

Part number1340-6666
Operating temperature0 °C … +85 °C
Measuring range: temperature0 °C … +85 °C
Measuring range: pressure0.1 … 1,050 mbar (0.1 … 788 Torr)
Accuracy: temperature± 0.1 °C
Accuracy: pressure± 0.25 mbar (0.1 mbar … 50 mbar) ± 5 % of reading (50 mbar … 100 mbar) ± 1 % FS (100 mbar … 1,050 mbar)
Resolution: temperature0.01 °C
Resolution: pressure0.1 mbar
Data memory2x 33,440 measurements
Sensor: temperaturePT1000, class A
Sensor: pressurePiezoresistive pressure sensor
Measurement interval250 ms … 24 hours
Real-time data transmissionYes
Storage temperature-20 °C … +70 °C
Measurement modesendless measurement Measure upon starttime Start immediately until end of memory Start- / Stop measurement
BatteryLithium, 3.6 V, User-replaceable
Dimensions (Ø x H)48 mm x 35 mm
Weightapp. 90 g
Housing material316 L stainless steel / PEEK
Protection classIP68
Factory calibration certificate0 °C and +60 °C ≤ 0.5 mbar and 50 mbar (at +25 °C) ≤ 0.5 mbar, 10 mbar and 50 mbar (at +60 °C)
Radio Equipment Directive (RED)2014/53/EU
Electromagnetic compatibility (EMC)DIN EN 301 489
Temperature probe diameterØ1.95 mm
Temperature probe lengthL = 40 mm

Tags and applications

Measured variable
TemperaturePressure
Form factor
Data logger
Brand
Ebro

Downloads

Common questions

What temperature range does the Ebro EBI 12-TP290 measure?

It measures from 0 °C to +85 °C. Accuracy is ± 0.1 °C and resolution is 0.01 °C. The sensor is a PT1000, class A.

What pressure range and accuracy does the Ebro EBI 12-TP290 have?

The range is 0.1 to 1,050 mbar (0.1 to 788 Torr). Accuracy is ± 0.25 mbar from 0.1 to 50 mbar. It is ± 5 % of reading from 50 to 100 mbar and ± 1 % FS from 100 to 1,050 mbar. Resolution is 0.1 mbar.

What is the IP rating of the Ebro EBI 12-TP290?

The protection class is IP68. The housing is made of 316 L stainless steel and PEEK.

What battery does the Ebro EBI 12-TP290 use, and can I replace it?

It uses a 3.6 V lithium battery. The battery is user-replaceable.

How many measurements can the Ebro EBI 12-TP290 store, and how often can it measure?

The data memory holds 2x 33,440 measurements. The measurement interval ranges from 250 ms to 24 hours.

What are the dimensions and weight of the Ebro EBI 12-TP290?

The logger measures 48 mm in diameter by 35 mm in height. It weighs approximately 90 g. The temperature probe is Ø1.95 mm and 40 mm long.

Tell us what you need to measure.

Send the parameters and ranges you need, and we will confirm the right configuration and price. Your enquiry will name this product.