EBI 12 temperature and pressure loggers
The Ebro EBI 12 temperature and pressure loggers are data loggers for recording temperature and pressure in sterilisation validation, in places such as steam sterilisers, autoclaves, endoscope washers and washer disinfectors. They record with a class A PT1000 temperature sensor and a piezoresistive pressure sensor covering 1 to 4,000 mbar. The versions differ in probe or needle, which suits them to different chambers, drains and washers.
Highlights
One logger that records temperature and pressure, with a choice of probe type, length and connection across the versions.
Temperature uses a class A PT1000 sensor at 0.01 °C resolution. Pressure uses a piezoresistive sensor at 1 mbar resolution.
The measurement interval runs from 250 ms to 24 hours. Real-time data transmission is supported.
The certificate covers temperature at 0 °C, +60 °C and +134 °C, and pressure at 100 mbar and 3,100 mbar.
Parameters
Temperature
Pressure
Configurations
Every version has the same class A PT1000 temperature sensor, piezoresistive pressure sensor, 1 to 4,000 mbar pressure range, IP68 rating and 250 ms to 24 hours measurement interval, so the choice is between probe or needle type, connection and temperature range.
EBI 12-TP222
Bendable metal probe, 1.50 x 500 mm, Luer-Lock connection. Range 0 °C … +150 °C. For autoclaves and endoscope washers.
EBI 12-TP226
Bendable metal probe, 1.50 x 250 mm. Range 0 °C … +150 °C. For the steriliser drain.
EBI 12-TP231-EX
Needle, 1.95 x 40 mm, Luer-Lock connection. Range 0 °C … +85 °C. ATEX approved for explosive areas.
EBI 12-TP234
Needle, 1.95 x 40 mm, hose connection. Range 0 °C … +150 °C. For washer disinfectors.
EBI 12-TP422
Three bendable metal probes, 1.50 x 500 mm, Luer-Lock connection. Range 0 °C … +150 °C.
EBI 12-TP231
Needle, 40 mm. Range 0 °C … +150 °C. For steam sterilisers and washer disinfectors.
EBI 12-TP237
Needle, 1.50 x 20 mm, hose connection. Range 0 °C … +140 °C. For routine and batch control.
Specifications
Standards
Sterilization, steam sterilizers, medical equipment
Small steam sterilizers
Sterilization of health care products — Moist heat
Washer Disinfectors
Tags and applications
- Measured variable
- TemperaturePressure
- Form factor
- Data logger
- Application
- Sterilisation validation
- Brand
- Ebro
Downloads
Common questions
How many measurements can the EBI 12 temperature and pressure loggers store?
The EBI 12-TP222, EBI 12-TP226, EBI 12-TP231-EX, EBI 12-TP234, EBI 12-TP231 and EBI 12-TP237 store 2x 33,440 measurements. The EBI 12-TP422 stores 4x 20,064 measurements.
What measurement interval can I set on the EBI 12 temperature and pressure loggers?
The measurement interval runs from 250 ms to 24 hours.
What pressure range do the EBI 12 temperature and pressure loggers measure?
The pressure range is 1 to 4,000 mbar with a resolution of 1 mbar. The pressure sensor is piezoresistive.
Is there an ATEX version of the EBI 12 temperature and pressure loggers?
Yes. The EBI 12-TP231-EX is ATEX approved as II1G Ex ia IIC T4 Ga under 2014/34/EU. Its permissible ambient conditions in the hazardous area are 0 °C to +85 °C and 100 Pa to 400 kPa.
What does the factory calibration certificate cover?
Temperature is certified at 0 °C, +60 °C and +134 °C. Pressure is certified at 100 mbar and 3,100 mbar at +25 °C, and at 3,100 mbar at +134 °C.
Can the battery in the EBI 12 temperature and pressure loggers be replaced?
Yes. They use a 3.6 V lithium battery that the user can replace. They are rated IP68.
Tell us what you need to measure.
Send the parameters and ranges you need, and we will confirm the right configuration and price. Your enquiry will name this product.






