SD40 Multi
The Lovibond SD40 Multi is a waterproof pocket tester for measuring pH, conductivity, salinity and TDS, with temperature display, in places such as industrial plants and swimming pools. It compensates for temperature automatically and shows measurement, calibration and alarm states through a blue, green or red backlight. The tester runs on four AAA batteries and is supplied with its electrode, a lanyard and a storage box.
Highlights
Measures pH, conductivity, salinity and TDS and displays temperature, with automatic temperature compensation.
The backlight is blue during measurement, green during calibration and red for alarms. Alarm limits are available.
The housing is rated IP 67, and the transparent lid gives the tester a stable stand.
Recognises USA and NIST pH buffers and conductivity standards of 84 µS/cm, 1413 µS/cm and 12 mS/cm.
Parameters
Conductivity
pH
Salinity
Total dissolved solids
Temperature
Consumables
These are the consumables this instrument uses. We confirm the part numbers for your instrument when we quote.
Calibration standards
Calibration standards, pH buffers and electrolyte solutions for calibrating the instrument.
Electrodes & probes
Electrodes, probes and replacement sensors, matched to the instrument.
Specifications
Tags and applications
Downloads
Common questions
What does the Lovibond SD40 Multi measure and over what ranges?
It measures pH (0 - 14), conductivity (0.01 - 20.00 mS/cm), salinity (0.01 - 10 g/L), TDS (0.01 - 20.00 ppt) and temperature.
What batteries does the SD40 use and how long do they last?
It uses four AAA batteries, with a stated battery life of more than 2000 h. Auto-OFF is included.
Is the SD40 waterproof?
Yes. The housing is rated IP 67.
What is supplied with the SD40?
The tester comes with its electrode, four batteries, a lanyard, a storage box, pH 4, 7 and 10 buffer tablets, a multilingual instruction manual, a certificate of compliance and a warranty declaration.
How is the SD40 calibrated?
Calibration takes one to three points. It recognises USA and NIST pH buffers and conductivity standards automatically, and has calibration and stability indicators.
How big is the SD40 and what temperatures can it work in?
It measures 40 x 40 x 180 mm and weighs 151 g. The stated environmental conditions are 0 - 60 °C and 0 - 80 % relative humidity, non-condensing.
Tell us what you need to measure.
Send the parameters and ranges you need, and we will confirm the right configuration and price. Your enquiry will name this product.





